Spinning Sample Along

Jillian Moreno is hosting an informal sample-along on her blog and on Instagram under the hashtag #samplealong. I can't recommend her book Yarnitecture enough, and I even had the opportunity to take her Yarnitecture workshop several years ago.

During the workshop, we spent a whole day sampling different ways of spinning yarn. It was like a playdate for spinners! So often, we feel like we don't have time to play with our fiber before we get down to the business of spinning. We feel like we can't "waste" fiber, especially if it's something special. The irony is that if we take time to sample before starting a big project, we'll make better choices instead of diving headfirst into a project and then realizing that we should have done it differently. (But only after there's no turning back.) 

The first step in the sample along is preparing your fiber. I've chosen to spin Monsoon Sunset in Polwarth. Last year, I spun Monsoon Sunset as a self-striping colorway for a cowl, but always wondered what it would look like spun up with different color manipulation techniques. This sample-along is the perfect opportunity to find out! Plus, I haven't spun Polwarth wool since I began spinning, so this is a great opportunity to try a different base. 

An important step in choosing how you will spin your fiber is to look at the length of your color repeats. Jillian Moreno suggests trying to lay the fiber out like the dyer might have during the dyeing stage. Above you can see how I apply dye to get long color repeats in my fiber. This is one of the longest color repeats of all my fiber - so long I couldn't get it all in the frame!

This fiber is relatively fresh from the dyepot, so it hasn't had a chance to get too compacted. Plus, I work very hard to make sure my fiber doesn't felt at all during the dye process, so basically I just needed to unbraid it. If your fiber is a little compacted, this is a great post on how to gently open up a braid of fiber. 

From there, it was time to divide the braid lengthwise into four long strips. Most braids weigh four ounces, but I dye 6-ounce braids to give plenty of opportunity to sample or spin a few extra yards. Each of my four sections weighs between 1.4 and 1.6 ounces, which I'm hoping will give me enough yarn to have a sample skein and a decent sized swatch of each sample style. 

The spinning styles Jillian Moreno is sampling are:

• As it comes
• Flipped
• Fractal
• Drafted together and plied

Because of the way the colors repeat in this braid, "flipped" will result in a very similar yarn to "as it comes," so I'll be thinking of a different way to play with the color for that one. While we're supposed to spin our default yarn, the yarn that we spin when we sit down and don't think about what we're going to do, Jillian recommends a heavy-fingering or thicker yarn, which is slightly thicker than my default, so I'll be working with my Spinner's Multitool to keep a consistently thicker yarn.

Now that my fiber's ready to go, I just have to get my wheel ready!